Tightening Torque
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Seat/handlebars slip even after tightening
Apply more torque as per spec; replace clamp/bolt if stripped.Torque Sensor Bottom Bracket Assembly and Disassembly
<br> Installation Process Preparation: Create an 11mm diameter hole under the bottom bracket to route the cable [00:15]. Left Tooth Bowl: Install the left tooth bowl clockwise and tighten it to a torque of 35-40 Newton-meters [00:24]. Cable & ...D50/ST50 BB Torque Sensor Specification Sheet
.Is torque sensor pedal assist system (PAS) better than motion sensor?
Generally speaking torque sensor is a more sophisticated technology which is getting a good performance and feedback on electric bikes such as those integrated with Bosch, Shimano or Yamaha ebike motor systems. Torque sensor should have an integrated ...Error info 4 - torque sensor abnormality
-Check PAS sensor on the crankshaft, as you rotate the pedals the LED should blink. -see the alignment of the disk to the sensor, the gap between sensor and disk should be 1-2mm and should maintain that distance. - look for the wire damage and dirt ...