Throttle sometimes doesn’t activate or only works sporadically
Check throttle cable for tightness at connection. Inspect display for error codes. If throttle works but pedal assist doesn’t, PAS sensor issue likely. Reset system; escalate if still unresolved.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Throttle or display malfunction after installing mirror or accessories on the handlebar
The mirror or the accessories are rubbing throttle's moving parts causing the issue Move these parts and create a reasonable clearance with throttle. If there is no physical contact between installed items yet the throttle or controller has issues or ...Error info 1 - throttle abnormality
-Make sure the throttle level is in ideal state and don’t apply throttle while booting up system. - Check the cables, wire can be stretched or damaged or the three-pin throttle connector could have been damaged. -Check the 9-pin connector on the ...Suspension doesn’t move freely, feels harsh
Adjust tension/preload, lubricate moving parts if possible. Contact support for further instruction if needed.0x25 Torque signal error (related to brake/throttle/PAS)
-usually happens when brake/throttle applied and then turning on the bike. - keep the brake/throttle/pas in ideal condition don’t apply brake or throttle and let the system completely bootup.Bike won’t power on after wash/rain, likely connector/moisture issue
Let dry fully, unplug/reconnect battery and display. Use contact cleaner if confident. Escalate if doesn’t recover soon.