System fails despite no displayed error, even after sensor swaps
Reseat controller, battery, and all major harness plugs. Swap in known-good sensors or components if available. If mystery persists, escalate; may indicate controller/wiring issue inside frame.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Critical sensor malfunctions even after swap/clean
Check all relevant connections. Test with known-good sensor. If problem shifts, issue likely in controller/wiring harness.Error info 4 - torque sensor abnormality
-Check PAS sensor on the crankshaft, as you rotate the pedals the LED should blink. -see the alignment of the disk to the sensor, the gap between sensor and disk should be 1-2mm and should maintain that distance. - look for the wire damage and dirt ...Bottom bracket (Error 25), PAS, or cadence sensor errors
Follow ENVO bottom bracket/PAS troubleshooting flow. Clean or replace sensor. If still faulty, escalate for new batch part.Is torque sensor pedal assist system (PAS) better than motion sensor?
Generally speaking torque sensor is a more sophisticated technology which is getting a good performance and feedback on electric bikes such as those integrated with Bosch, Shimano or Yamaha ebike motor systems. Torque sensor should have an integrated ...Brake sensor fails (motor doesn't cut out or stays off) due to magnet position
Reposition magnet at brake lever. Test sensor function. Replace if undetectable after repositioning.