Rear rack, fenders, etc. don’t mount as expected
Confirm compatibility (rack vs frame model). Carefully fit per instructions or contact for hardware kit if needed.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Accessories don’t fit, mounting hardware won’t align
Loosen all bolts, align all brackets, then tighten little by little. If threads are stripped or holes don’t line up, contact ENVO for hardware or alignment advice.Update on Veemo Rear Shock Issue
Dear Veemo Community, We want to bring your attention to a concern that has been raised by some of our customers regarding the rear shock of the Veemo. A few users have reported experiencing a noisy rear shock that binds and makes a popping sound ...Rack bolts loosen, causing rattle or misalignment
Retighten or replace bolts as per support illustrations; check rack mounting points for strip or damage.Accessories don’t fit flush or bolts don’t line up
Remove and reinstall, loosen all fasteners and adjust, retighten slowly, or bend lightly. Escalate to ENVO if incompatible.ENVO Flex Trike Rear Axle Bearing Removal
If you notice a knocking sound coming from the rear axle of ENVO Flex Trike and have been advised by ENVO Tech team please follow the following procedure. Step 1: Remove the Brake calipers. Step 2: Remove the Wheel Nut. Step 3: Loosen the bearing ...