Rear light inoperable post-build
Confirm correct wiring/connection, replace bulb/LED as needed. If still non-functional, request warranty replacement.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Rear light is dead or does not illuminate
Confirm if light is battery-powered or wired. Replace or charge batteries if standalone. Check connection if wired. If still inoperable, request new light from support.Rear light does not work post-assembly or randomly fails.
Test wiring and LED. Try different power source. Escalate if failure persists after troubleshooting.Rear light does not illuminate after install
Check connection and alignment, if battery LED, test/replace battery. Replace light if faulty under warranty.ENVO E35 Scooter Rear Fender Replacement
The handlebar locking mechanism located on rear fender may malfunction if used harshly or due to general wear and tear, this article instructs the user on how to replace the part. Step 1: Use M3 Allen Key to remove the rear fender bolts. Step 2: ...D35/ST Rear Taillight doesnt turn on when turning on the front light.
Check the connection between the taillight and controller, if the connector is loose or the wire is damaged replace that. On the other hand, if you notice that the rear taillight is working when pressing the brake (feature available in few newer ...