Pro’s adjustable handlebar is stuck/loose
Loosen stem bolts, re-adjust, retighten to spec. Use assembly paste and check for burrs-interference.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Scooter handlebar folding clamp is loose
If you notice a play in the folding clamp of ENVO Scooters this could be due to the clamping mechanism not engaging properly. Follow the following steps to adjust the clamp for a smoother performance. 1: Fold the handlebar and use 6mm Allen Key to ...ENVO D35 Manual
ENVO D35 is the second generation of ENVO e-bikes engineered by ENVO Drive Systems in Canada for British Columbia’s steep hills, Alberta’s freezing temperatures, the Maritimes’ chilly wind, Ontario’s long commutes and Quebec with all the above ...ENVO ST Manual
ENVO ST is ENVO e-bikes engineered by ENVO Drive Systems in Canada for British Columbia’s steep hills, Alberta’s freezing temperatures, the Maritimes’ chilly wind, Ontario’s long commutes and Quebec with all the above applied. Unboxing and Assembly ...Stax Pro - Locking Seatpost Adjustment
If you notice the seat on Stax Pro is sliding, then the seat clamp may need adjustment. 1: Unlock the clamp. 2: Use the provided hex tool to tighten the bolt clockwise.Locking Seatpost Clamp for Lynx20'' and Stax Pro - How to lock and unlock
Steps: Locate the clamp: The seatpost clamp is located on the seatpost. It will have a small hole in the center for inserting the key. Insert the key: Turn the key clockwise until you hear a clicking noise. This will unlock the clamp. Open the clamp: ...