PAS works inconsistently or stops
Check all wiring and BB sensor; refer to Error 25 troubleshooting; escalate persistent cases.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Throttle sometimes doesn’t activate or only works sporadically
Check throttle cable for tightness at connection. Inspect display for error codes. If throttle works but pedal assist doesn’t, PAS sensor issue likely. Reset system; escalate if still unresolved.Motor works on and off while pedaling, but fine when using throttle PAS
magnet disk on the crank is loose or wobbling Fix it in place using epoxy or flexible heat or silicon glue. Align the disk with sensor.PAS function not working but throttle still operates
Reset controller. Check PAS sensor wiring/disc. If sensor is broken or displaced, request replacement part.0x25 Torque signal error (related to brake/throttle/PAS)
-usually happens when brake/throttle applied and then turning on the bike. - keep the brake/throttle/pas in ideal condition don’t apply brake or throttle and let the system completely bootup.Is torque sensor pedal assist system (PAS) better than motion sensor?
Generally speaking torque sensor is a more sophisticated technology which is getting a good performance and feedback on electric bikes such as those integrated with Bosch, Shimano or Yamaha ebike motor systems. Torque sensor should have an integrated ...