Other sensor errors (PAS, speed, brake cut-off)
Isolate by checking display error. Follow corresponding troubleshooting in support database.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Do we have to install the brake cut-off sensors?
It’s not a mandatory by regulations to install brake cut-off sensors. The sensors are for emergency incidents in cases when you brake abruptly – they’ll cut off the motor’s power. With pedal assist systems, you may not be as quick to squeeze the ...0x25 Torque signal error (related to brake/throttle/PAS)
-usually happens when brake/throttle applied and then turning on the bike. - keep the brake/throttle/pas in ideal condition don’t apply brake or throttle and let the system completely bootup.Is torque sensor pedal assist system (PAS) better than motion sensor?
Generally speaking torque sensor is a more sophisticated technology which is getting a good performance and feedback on electric bikes such as those integrated with Bosch, Shimano or Yamaha ebike motor systems. Torque sensor should have an integrated ...ENVO Lynx 20 Adjust Max Speed and Display Parameter Setting
Error info 4 - torque sensor abnormality
-Check PAS sensor on the crankshaft, as you rotate the pedals the LED should blink. -see the alignment of the disk to the sensor, the gap between sensor and disk should be 1-2mm and should maintain that distance. - look for the wire damage and dirt ...