Only partial speed from throttle
Test throttle on another unit/display; check menu setting; escalate for defect.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Throttle or display malfunction after installing mirror or accessories on the handlebar
The mirror or the accessories are rubbing throttle's moving parts causing the issue Move these parts and create a reasonable clearance with throttle. If there is no physical contact between installed items yet the throttle or controller has issues or ...Throttle loses response, or trike speed surges/drops unexpectedly
Check throttle wiring at handlebar and controller for firm connection. Inspect for cut/kinked wire at folding points. If physical harness OK, try controller reset. Test on PAS mode—if both affected, escalate for controller assessment.Throttle action does nothing
Inspect throttle wires, test connection; verify with another throttle if possible; escalate for replacement.Veemo display showing incorrect speed/speed limit does not work
If you Veemo display is showing incorrect speed or the speed is above the speed limit set on the display, then your display needs to be updated with the latest Firmware update. To get the latest update, contact us at ...Error info 1 - throttle abnormality
-Make sure the throttle level is in ideal state and don’t apply throttle while booting up system. - Check the cables, wire can be stretched or damaged or the three-pin throttle connector could have been damaged. -Check the 9-pin connector on the ...