No response on throttle, or intermittent motor power (Pro models)
Inspect throttle wiring, confirm system is ON and battery fully charged. Swap to test with other throttle if possible. Escalate for part replacement.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Throttle or display malfunction after installing mirror or accessories on the handlebar
The mirror or the accessories are rubbing throttle's moving parts causing the issue Move these parts and create a reasonable clearance with throttle. If there is no physical contact between installed items yet the throttle or controller has issues or ...Pedals feel stiff/no power, but throttle runs motor
Check PAS sensor/disc at crank, ensure wiring secure. Cycle power. If issue remains, likely PAS sensor fault—contact ENVO for part or repair.Is the ENVO D35 2020 a 350W or 500W motor ?
The Motor in fact is a 500W, As you can see in the LCD when you put pressure and load on the motor the number that shows on the right hand side of the display can go up to ~650W electrically Max. That means your system can easily take up to 500W ...System is on but motor has no power
Loose connections Check connections and reconnect, make sure to align arrows Brake cut off sensor is malfunctioning Disconnected the brake cut off sensor, check if motor is powering Battery not sufficiently charged Check battery voltage. If the ...Motor triggers while not pedaling or throttle is touched accidentally
Check throttle sensitivity in settings. Inspect for stuck throttle or mis-wired PAS. Contact support; may need throttle or controller calibration/replacement.