My Bike is showing incorrect speed and distance travelled?

My Bike is showing incorrect speed and distance travelled?

If your wheel size is not set correctly, follow these steps to adjust it:


  1. Enter Settings Mode

    • With the vehicle turned on and stationary, press and hold the “i” button for more than 2 seconds.

    • The display will enter the Setting state.

  2. Go to Advanced Settings

    • In the Setting interface, press UP or DOWN to select Advanced Settings.

    • Press the “i” button and enter the password to open the menu.

  3. Adjust Wheel Size

    • In Advanced Settings, press UP or DOWN to select Wheel.

    • Press the “i” button to enter.

    • Use UP or DOWN to choose the correct wheel diameter from the available options:
      16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27.5 / 28

    • Press “i” to save and exit to the Wheel menu.

  4. Exit to Main Screen

    • To return to the main interface, either:

      • Hold the “i” button, or

      • Select BACK → Exit.

Correct Wheel Size Values

  • ENVO D50 / ST50 → 27.5”

  • Flex Overland / Trike → 22”




    Submit a Ticket Here.


    We're happy to help:

    Still can't find the solution?

    Please fill up the support form at the link below:


                      
           
                   Or
                                Connect with our agents through live chats  


      • Related Articles

      • Veemo display showing incorrect speed/speed limit does not work

        If you Veemo display is showing incorrect speed or the speed is above the speed limit set on the display, then your display needs to be updated with the latest Firmware update. To get the latest update, contact us at ...

      • ENVO Flex: Changing Max Speed Settings

        Press MODE button for 2 seconds, it will get you into setting menus. You can press UP/DOWN button to change the parameter setting and pressing MODE button will switch the screen to the next parameter. Enter the password "1919" when you get to the Pd ...

      • Bike not attaining expected e-assist speed

        Ensure battery fully charged. Check for tire drag (fender/rubbing). Review all PAS/throttle display settings. If still slow, test motor performance (may need service).

      • Will my bike frame fit Snowbike Kit?

        The Snowbike Kit is designed for a variety of bike frame designs and while most frames will be compatible with ENVO Snowbike Kit, this article explains how to make sure your bike frame is compatible.  Please note the Snowbike Kit is not compatible ...

      • ENVO D35/ST Speed and Distance is twice the actual value.

        The display settings may not be configured correctly. To configure your display please follow the instructions below Step 1: Double press "M" on the keypad, it will take you to the Display Settings.  Step 2: Press Power button on the keypad to enter ...