Motor works on and off while pedaling, but fine when using throttle PAS

Motor works on and off while pedaling, but fine when using throttle PAS

magnet disk on the crank is loose or wobbling

Fix it in place using epoxy or flexible heat or silicon glue. Align the disk with sensor.

Submit a Ticket Here.

---

We're happy to help:

Still can't find the solution?

Please fill up the support form at the link below:

​

                  

       

                                  Or

Connect with our agents through live chats  

• Related Articles

• Throttle or display malfunction after installing mirror or accessories on the handlebar

  The mirror or the accessories are rubbing throttle's moving parts causing the issue Move these parts and create a reasonable clearance with throttle. If there is no physical contact between installed items yet the throttle or controller has issues or ...

• 0x25 Torque signal error (related to brake/throttle/PAS)

  -usually happens when brake/throttle applied and then turning on the bike. - keep the brake/throttle/pas in ideal condition don’t apply brake or throttle and let the system completely bootup.

• The left or right motor is not working

  Cable disconnected, cable damaged, the motor is damaged Check if the brakes are functioning properly, ensure the lever is completely closed Check the motor cables for damage Check the motors by swapping the controller, if the motor can be operated ...

• The pedal assist is not working even though throttle is working fine.

  PAS sensor is disconnected Check wires and connections for the PAS sensor or restore parameters to default

• Is torque sensor pedal assist system (PAS) better than motion sensor?

  Generally speaking torque sensor is a more sophisticated technology which is getting a good performance and feedback on electric bikes such as those integrated with Bosch, Shimano or Yamaha ebike motor systems. Torque sensor should have an integrated ...