Motor triggers while not pedaling or throttle is touched accidentally
Check throttle sensitivity in settings. Inspect for stuck throttle or mis-wired PAS. Contact support; may need throttle or controller calibration/replacement.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Throttle or display malfunction after installing mirror or accessories on the handlebar
The mirror or the accessories are rubbing throttle's moving parts causing the issue Move these parts and create a reasonable clearance with throttle. If there is no physical contact between installed items yet the throttle or controller has issues or ...Motor works on and off while pedaling, but fine when using throttle PAS
magnet disk on the crank is loose or wobbling Fix it in place using epoxy or flexible heat or silicon glue. Align the disk with sensor.No response on throttle, or intermittent motor power (Pro models)
Inspect throttle wiring, confirm system is ON and battery fully charged. Swap to test with other throttle if possible. Escalate for part replacement.Motor making a grinding noise
Motor gears may be damaged, the belt may be under stress, or the frame bearings are damaged Lift the kart, both the tracks should not touch the ground. Slowly activate the throttle and check for the noise. Compare both the tracks Locate the noise by ...Motor won’t assist on pedaling
Check PAS sensor at bottom bracket; verify controller connection. Test by rotating pedals manually, escalate if not resolved.