Motor is making noise

Motor is making noise

This is normal when motor is under heavy load (hills, heavy cargo)
Try giving motor more assist under heavy loads
Motor vibrations causing resonance on other bicycle components
Reposition parts and add vibration damping between parts, make sure motor is secured

    Submit a Ticket Here.


    We're happy to help:

    Still can't find the solution?

    Please fill up the support form at the link below:
    ​
                      
           
                                      Or
    Connect with our agents through live chats  


      • Related Articles

      • Motor making a grinding noise

        Motor gears may be damaged, the belt may be under stress, or the frame bearings are damaged  Lift the kart, both the tracks should not touch the ground. Slowly activate the throttle and check for the noise. Compare both the tracks Locate the noise by ...

      • The brakes are making noise

        Brake pads are rubbing on the rotor Pads need to be adjusted. Adjust the cable tension to shift the left pad, use an Allen key to adjust the right pad. The pads should be adjusted so the rotor spins freely in the middle of the two pads Brakes not ...

      • Front fender is making noise

        Front fender is too close to the tire and is rubbing Fender needs to be adjusted, try lifting it up and moving it away from the tire, may need some slight bending, make sure you have secured it in its highest position

      • Is the ENVO motor noisy?

        Generally when ebike motors are in use, there will be a slight noise. Noise occurs when you’re switching controls, partially because of the gears and magnets are cogging against each other, which is inevitable. The gears are made of Nylon, and have ...

      • How does ENVO geared motor perform when un-powered and using as regular bike?

        Our geared motors have an internal clutch which is automatically released when motor is not in use. Therefore unlike some bikes which has a slight cogging torque and noise, there is no drag or noise at all when freewheeling.