Motor does not engage when pedaling due to PAS/bottom bracket sensor failure
Check Error 25, test connections at crank/bottom bracket. Review ENVO troubleshooting resources, escalate for part replacement if persistent.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Torque Sensor Bottom Bracket Assembly and Disassembly
<br> Installation Process Preparation: Create an 11mm diameter hole under the bottom bracket to route the cable [00:15]. Left Tooth Bowl: Install the left tooth bowl clockwise and tighten it to a torque of 35-40 Newton-meters [00:24]. Cable & ...Error 25 and pedal sensor/bottom bracket failures repeatedly occur
Reference ENVO’s technical database. Replace bottom bracket with upgraded ENVO part. If unresolved, escalate warranty claim.Is torque sensor pedal assist system (PAS) better than motion sensor?
Generally speaking torque sensor is a more sophisticated technology which is getting a good performance and feedback on electric bikes such as those integrated with Bosch, Shimano or Yamaha ebike motor systems. Torque sensor should have an integrated ...Motor works on and off while pedaling, but fine when using throttle PAS
magnet disk on the crank is loose or wobbling Fix it in place using epoxy or flexible heat or silicon glue. Align the disk with sensor.ENVO Flex Overland User Manual
.