Motor cuts/stops randomly when braking not engaged
Check/adjust sensor at brake lever; replace if confirmed faulty.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Motor cuts out, sometimes due to connection/controller issues
Check motor cable and controller plug. Unplug/re-seat connectors. Confirm no moisture/damage, escalate if persistent.Left motor stops when right brake is applied / right motor stop when left brake is applied
Cables are mismatched Check the label on the controller and display, Ensure (L=L) and (R=R) Swap the brake cable connectorsMotor not cutting as brakes are applied; OR power cut when not braking
Check sensor magnet position on lever; realign or replace sensor as per ENVO support instructions.Is it safe to install motor on alloy or steel front forks?
Whether it’s made of alloy or steel, bike forks are designed for severe working conditions. They’re prepared for road shocks and hard braking. The amount of stress from motor axle torque is negligible compared to other loading scenarios. However, ...Motor is making noise
This is normal when motor is under heavy load (hills, heavy cargo) Try giving motor more assist under heavy loads Motor vibrations causing resonance on other bicycle components Reposition parts and add vibration damping between parts, make sure motor ...