Loud clicking or grinding during pedaling

Loud clicking or grinding during pedaling

Lubricate, check for loose cogs or worn teeth; replace if damaged.

    Submit a Ticket Here.


    We're happy to help:

    Still can't find the solution?

    Please fill up the support form at the link below:
    ​
                      
           
                                      Or
    Connect with our agents through live chats  


      • Related Articles

      • Does the electric bike recharge by pedaling?

        No, it is not possible to recharge the ebike by pedaling.  The reason is because regeneration demands heavy push to pedal, which is exhausting. Regeneration only makes sense when you use the kinetic energy of a bike in breaking or descending a ...

      • Motor making a grinding noise

        Motor gears may be damaged, the belt may be under stress, or the frame bearings are damaged  Lift the kart, both the tracks should not touch the ground. Slowly activate the throttle and check for the noise. Compare both the tracks Locate the noise by ...

      • Creaking or clicking from cranks/chain/cassette

        Lubricate chain, inspect for worn or loose parts. Tighten crank bolts. Replace chain if elongated. Ask dealer if persistent.

      • Motor won’t assist on pedaling

        Check PAS sensor at bottom bracket; verify controller connection. Test by rotating pedals manually, escalate if not resolved.

      • Motor does not engage when pedaling due to PAS/bottom bracket sensor failure

        Check Error 25, test connections at crank/bottom bracket. Review ENVO troubleshooting resources, escalate for part replacement if persistent.