Installation Procedure for Non-Removable Battery Shield
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Installation Procedure for Removable Battery Shield
D50/ST50 Cargo Racks Installation Procedure
Front Rack Assembly 1: Move the wires out of the way. 2: Using 6mm Allen Key, assemble the front rack. 3x M6 bolts are needed for the assembly. Cargo Rear Rack Assembly To assemble the cargo rear rack, first remove the standard rear rack. 1: Remove ...Procedure: Replacing the DC-DC Converter on the Veemo
This article provides a step-by-step guide to replace the old DC-DC converter in your Veemo with the new low-draw version. This replacement addresses the issue of excessive power drain during standby mode. Customers with the affected converters will ...ENVO Flex Snowbike - Installation Instructions
Congratulations on your new ENVO Flex Snowbike! This guide will walk you through the assembly process step-by-step. Before you begin, ensure you have all the necessary tools: Tools: Allen key Set 17mm Wrenches or Adjustable Wrench Step 1: Unboxing ...Battery does not lock properly
Incomplete installation of the battery, damage from forcing the battery to lock, battery bracket is misaligned Insert the battery completely and then apply lock. Do not apply force on the key, doing so may cause damage Check the bracket for dirt and ...