I have a rack mounted already. Would the R35 or R50 work?

I have a rack mounted already. Would the R35 or R50 work?

Rack battery in R series can be mounted to your existing rack, however you need to drill some holes or make some support for that.


    Submit a Ticket Here.


    We're happy to help:

    Still can't find the solution?

    Please fill up the support form at the link below:
    ​
                      
           
                                      Or
    Connect with our agents through live chats  


      • Related Articles

      • Can I put my ebike on a car rack?

        Yes. Our products typically add 6-7Kg (13-16 lbs) to the weight of a bike. You also have the option to remove the battery, eliminating 3-4kg of the weight, when putting your electric bike on a car rack.

      • Does the throttle on D35/ST work on PAS 0?

        All the D35/ST prior to 2022 had a throttle that did not work on PAS 0 but then after the feedback from the customer the setting was changed, and all D35/ST produced in the second half of 2022 and onward had the setting where throttle works on PAS ...

      • ENVO Flex Overland Front brake hose rubbing with front rack.

        If you notice the front brake hose rubbing with the front carrier, make sure to change the hose routine as shown below (from the back of the fork). Step 1: Use 3mm Hex Key to remove the holder. Step 2: Use 5mm Hex Key to remove the caliper bolts. ...

      • ENVO Flex Overland User Manual

        .

      • ENVO Conversion Kits Manual

        Conversion Kit Installation Step-By-Step guide: You can download the conversion kit manual using the link below.