How to install the seatpost locking clamp

How to install the seatpost locking clamp



    Submit a Ticket Here.



    We're happy to help:

    Still can't find the solution?

    Please fill up the support form at the link below:

                      
           
                                      Or
    Connect with our agents through live chats  


      • Related Articles

      • Locking Seatpost Clamp for Lynx20'' and Stax Pro - How to lock and unlock

        Steps: Locate the clamp: The seatpost clamp is located on the seatpost. It will have a small hole in the center for inserting the key. Insert the key: Turn the key clockwise until you hear a clicking noise. This will unlock the clamp. Open the clamp: ...
      • Stax Pro - Locking Seatpost Adjustment

        If you notice the seat on Stax Pro is sliding, then the seat clamp may need adjustment. 1: Unlock the clamp. 2: Use the provided hex tool to tighten the bolt clockwise.
      • Scooter handlebar folding clamp is loose

        If you notice a play in the folding clamp of ENVO Scooters this could be due to the clamping mechanism not engaging properly. Follow the following steps to adjust the clamp for a smoother performance. 1: Fold the handlebar and use 6mm Allen Key to ...
      • Do we have to install the brake cut-off sensors?

        It’s not a mandatory by regulations to install brake cut-off sensors.  The sensors are for emergency incidents in cases when you brake abruptly – they’ll cut off the motor’s power. With pedal assist systems, you may not be as quick to squeeze the ...
      • ENVO Flex Trike User Manual

        .