How long does the battery last before it needs to be replaced?

How long does the battery last before it needs to be replaced?

We offer Li-Ion battery packs which are well engineered and protected with BMS (Battery Management System) for longest possible life. The cells used in our battery packs are A-grade LG, Samsung or Panasonic branded cells which have strict quality control and maintain their quality and performance for long. The technology and quality of cells are similar to what Tesla is using for their cars. There is a calendar life as well as cyclic life on the battery cells which is about 6 years and 800 full charge/discharge cycles. If using daily, you can expect about 20,000-30,000Km before the battery capacity shrinks to less than 50% which we consider as dead.

    Submit a Ticket Here.


    We're happy to help:

    Still can't find the solution?

    Please fill up the support form at the link below:
    ​
                      
           
                                      Or
    Connect with our agents through live chats  


      • Related Articles

      • ENVO Battery Safety Guidelines

        How to Safely Charge Ebike Battery Most reported battery fires are caused during the charging of the batteries. Hence, customers must be extra cautious when charging the batteries. Following, you can find some tips on the proper charging process: ...

      • How long does it take to recharge the battery?

        Approx. 4-7 hours depending on the battery capacity using standard chargers. We may offer quick chargers which doubles the speed of charge.

      • ENVO Battery Sleep Mode Function

        ENVO Batteries are equipped with a sleep mode function that gets triggered after 8 hours of no activity. After having ridden the bike they will go into power saver mode after 7-8 hrs. You will need to reset the batteries after this period by removing ...

      • ENVO Flex (2024) Dual Battery Setup

        Install the bracket: Remove the rubber caps from the holes on the rear side of the bike. Attach the bracket to the holes. Open the bike: Open the folding hinge and then the frame of the bike. Remove the controller plate: Remove the two Phillips ...

      • Can I charge my ebike battery by a Portable Power Station 518Wh Outdoor Mobile Lithium Battery Pack with 110V/500W AC Outlet?

        It is doable for partial charge but this setup cannot completely charge your bike. Here is an example of how to calculations based on your parameters work: Your charger normally needs about 200W input supply at 110V AC, this supply says 500W which is ...