How do I check which battery fits on my bike’s frame?
First of all check the mounting place alternatives on your bike. The lower center of gravity is a big advantage. To check if a certain battery fits in the frame check the battery dimensions on the manual.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Will my bike frame fit Snowbike Kit?
The Snowbike Kit is designed for a variety of bike frame designs and while most frames will be compatible with ENVO Snowbike Kit, this article explains how to make sure your bike frame is compatible. Please note the Snowbike Kit is not compatible ...ENVO Flex (2024) Dual Battery Setup
Install the bracket: Remove the rubber caps from the holes on the rear side of the bike. Attach the bracket to the holes. Open the bike: Open the folding hinge and then the frame of the bike. Remove the controller plate: Remove the two Phillips ...ENVO Battery Safety Guidelines
How to Safely Charge Ebike Battery Most reported battery fires are caused during the charging of the batteries. Hence, customers must be extra cautious when charging the batteries. Following, you can find some tips on the proper charging process: ...Can you tell me how I know the second battery is connected properly?
To check if your second battery is connected properly: Turn off your Flex Overland/Trike/D50. Remove the primary battery. Turn on the bike. If it runs on the second battery, you know it's connected correctly.D50/ST50 Dual Battery Setup Instructions
1: Fasten the Dual Battery Bracket to the downtube of the bike. 2: Remove the battery from the downtube and remove the wire shield shown bellow. 3: Using three fasteners, remove the charging pins. 4: Remove the plastic side plate. 5: Push the ...