Frame vibrates with motor use
Check battery tightness, motor mounts, and fender fit. If no improvement, possible internal fault—contact ENVO for further inspection.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Will my bike frame fit Snowbike Kit?
The Snowbike Kit is designed for a variety of bike frame designs and while most frames will be compatible with ENVO Snowbike Kit, this article explains how to make sure your bike frame is compatible. Please note the Snowbike Kit is not compatible ...Motor making a grinding noise
Motor gears may be damaged, the belt may be under stress, or the frame bearings are damaged Lift the kart, both the tracks should not touch the ground. Slowly activate the throttle and check for the noise. Compare both the tracks Locate the noise by ...Is the ENVO motor noisy?
Generally when ebike motors are in use, there will be a slight noise. Noise occurs when you’re switching controls, partially because of the gears and magnets are cogging against each other, which is inevitable. The gears are made of Nylon, and have ...ENVO Rear Hub Motor Plate Replacement
Step 1: Remove the Rear wheel from the frame Step 2: Remove the Cassette from the motor Step 3: Remove Jam Nut from the axle Step 4: Remove bearing retail ring and push out the plate as shown belowDoes your hub motor fit thru-axle forks?
The hub motors only work with drop out frame but for thru-axle configuration you can go with a mid drive motor.