Fixing the Stax Chain Falling Off Issue
Step 1: Torque the Crankset to 35 Nm
The first step in ensuring your chain remains secure is to properly tighten the crankset bolt. Using a torque wrench, tighten the bolt securing the crankset to a torque specification of 35 Newton-meters (Nm).
Step 2: Shift the Chain to Gear 1
Next, bring the chain to the first gear on the rear cassette (the largest cog).
Step 3: Remove Two Links from the Chain
Carefully remove two links from the chain. Use a chain breaker tool for this process, ensuring clean and precise removal. Reducing the chain length increases its tension, preventing it from slipping off the gears.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Please fill up the support form at the link below:
Or
Connect with our agents through live chats 
Related Articles
ENVO Stax User Manual
. <br>
Stax Pro - Locking Seatpost Adjustment
If you notice the seat on Stax Pro is sliding, then the seat clamp may need adjustment. 1: Unlock the clamp. 2: Use the provided hex tool to tighten the bolt clockwise.
ENVO Stax Display User Manual
.
ENVO Stax DropBar Instructions and Manuals
Find everything you need to set up, maintain, and get the most out of your ENVO bike. This page includes assembly videos, instructional guides, and downloadable PDF manuals to help you with setup, operation, maintenance, and key product features. ...
ENVO Stax Pro suspension fork too stiff? Almost no suspension travel.
The Stax Pro features a suspension fork to enhance comfort and stability during your rides. If you find the ride too stiff and not absorbing bumps as desired, the pre-tension on the fork's spring might be set too high. Luckily, adjusting the ...