Fender not installed parallel or shifts after bumps
Loosen mounts, re-align, then retighten bolts. Check for twisted stays or brackets.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Poor chain retention or shifting on bumps
Inspect alignment of derailleur. Confirm all bolts tight. Monitor chain length and lubricate for smoother shifts.Front fender is making noise
Front fender is too close to the tire and is rubbing Fender needs to be adjusted, try lifting it up and moving it away from the tire, may need some slight bending, make sure you have secured it in its highest positionENVO E35 Scooter Rear Fender Replacement
The handlebar locking mechanism located on rear fender may malfunction if used harshly or due to general wear and tear, this article instructs the user on how to replace the part. Step 1: Use M3 Allen Key to remove the rear fender bolts. Step 2: ...Fender rubs on tire, leading to noise/drag
Realign fender, adjust stays/mounts for even clearance, and secure bolts.Fender is too near tire, often after assembly or rough transit
Attempt to adjust height/angle via mounting bolts. If support wires are fixed, try gently bending them for clearance. If unresolved, contact ENVO for fender kit advice.