Error info 1 - throttle abnormality
-Make sure the throttle level is in ideal state and don’t apply throttle while booting up system.
- Check the cables, wire can be stretched or damaged or the three-pin throttle connector could have been damaged.
-Check the 9-pin connector on the controller side. The pins are bend when not inserted correctly.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Throttle or display malfunction after installing mirror or accessories on the handlebar
The mirror or the accessories are rubbing throttle's moving parts causing the issue Move these parts and create a reasonable clearance with throttle. If there is no physical contact between installed items yet the throttle or controller has issues or ...I see Error info 01 and my throttle is not working
Check throttle positioning. Clean throttle area. It may be stuck on something, make sure you leave some space around the throttleError info 2 - motor hall sensor abnormality
- Check for motor cables from wheel axel which might be damaged. Check for any kind of stretch wires or damaged cables from motor to controller.Error info 5 - speed sensor abnormality
- check for motor cables which might got damage.Error info 4 - torque sensor abnormality
-Check PAS sensor on the crankshaft, as you rotate the pedals the LED should blink. -see the alignment of the disk to the sensor, the gap between sensor and disk should be 1-2mm and should maintain that distance. - look for the wire damage and dirt ...