ENVO Rear Hub Motor Plate Replacement

ENVO Rear Hub Motor Plate Replacement

Step 1: Remove the Rear wheel from the frame
Step 2: Remove the Cassette from the motor
Step 3: Remove Jam Nut from the axle
Step 4: Remove bearing retail ring and push out the plate as shown below


    Submit a Ticket Here.


    We're happy to help:

    Still can't find the solution?

    Please fill up the support form at the link below:
    ​
                      
           
                                      Or
    Connect with our agents through live chats  


      • Related Articles

      • ENVO E35 Scooter Rear Fender Replacement

        The handlebar locking mechanism located on rear fender may malfunction if used harshly or due to general wear and tear, this article instructs the user on how to replace the part.  Step 1: Use M3 Allen Key to remove the rear fender bolts. Step 2: ...

      • ENVO Flex Urban

        .

      • ENVO D35 Manual

        ENVO D35 is the second generation of ENVO e-bikes engineered by ENVO Drive Systems in Canada for British Columbia’s steep hills, Alberta’s freezing temperatures, the Maritimes’ chilly wind, Ontario’s long commutes and Quebec with all the above ...

      • ENVO Stax User Manual

        .

      • ENVO Lynx 20 Manual.

        The manual for the ENVO Lynx 20 can be found attached to this article. Unboxing and Assembly Instructions (2020-2022) Please note ENVO Lynx 2023 comes fully assembled in the box.