ENVO Flex Dual Battery Setup Tutorial

ENVO Flex Dual Battery Setup Tutorial



    Submit a Ticket Here.


    We're happy to help:

    Still can't find the solution?

    Please fill up the support form at the link below:
    ​
                      
           
                                      Or
    Connect with our agents through live chats  


      • Related Articles

      • ENVO Flex (2024) Dual Battery Setup

        Install the bracket: Remove the rubber caps from the holes on the rear side of the bike. Attach the bracket to the holes. Open the bike: Open the folding hinge and then the frame of the bike. Remove the controller plate: Remove the two Phillips ...

      • ENVO Flex Overland/SnowBike Dual Battery Setup

        Do you have the battery rail? 1: Attach the battery rail to the frame using the slots cutouts and adjust the height. 2: Attach the battery bracket (plastic part) to the battery rail using 3 screws. In case you dont have the battery rail, use the ...

      • ENVO Flex Trike User Manual

        .

      • ENVO Flex Snowbike User Manual

        .

      • ENVO Flex Trike Frame Alignment Tutorial

        Here is a tutorial on how to fix the tilt angle displacement on the ENVO Flex Trike Tools Required: Bubble leveler Number 6 Allen key Number 15 wrench Number 19 wrench Steps: Place the bubble leveler on the rear part of the tricycle. You will see ...