ENVO EBike Controller Reprogramming Instructions

ENVO EBike Controller Reprogramming Instructions

The controller reprogramming device is a small device used to update program in ENVO Ebikes.



Step 1: The device required DC power to operate, you can use a powerbank/laptop output to power the device.



Step 2: Unplug the display cable and attach the cable coming out of the device with the display cable on controller side (the part of cable going toward the controller and away from the display).



Step 3: Press the "SET" button to start the programming. When the completed device will make a beeping noise. (takes approx 20 seconds) 



    Submit a Ticket Here.


    We're happy to help:

    Still can't find the solution?

    Please fill up the support form at the link below:
    ​
                      
           
                                      Or
    Connect with our agents through live chats  


      • Related Articles

      • Can ENVO motor/controller handle 48 volts battery?

        Firstly note that higher voltage will only increase max speed, which will be out of ebike street legal criteria, and does not affect torque or traction. Controller is not capable of 48V but if you replace the controller with a 48V. motor should be ...

      • ENVO Flex Urban

        .

      • ENVO D35 Manual

        ENVO D35 is the second generation of ENVO e-bikes engineered by ENVO Drive Systems in Canada for British Columbia’s steep hills, Alberta’s freezing temperatures, the Maritimes’ chilly wind, Ontario’s long commutes and Quebec with all the above ...

      • ENVO D50 / ST50 Manual

        .

      • ENVO Lynx 20 Manual.

        The manual for the ENVO Lynx 20 can be found attached to this article. Unboxing and Assembly Instructions (2020-2022) Please note ENVO Lynx 2023 comes fully assembled in the box.