Display shows error 06 (startup issue)

Display shows error 06 (startup issue)

Reboot display and controller (power off/on), check all wiring between battery and controller. Confirm battery fully charged. Contact ENVO with error code if persists.

    Submit a Ticket Here.


    We're happy to help:

    Still can't find the solution?

    Please fill up the support form at the link below:


                      
           
                   Or
                                Connect with our agents through live chats  


      • Related Articles

      • ENVO Flex Display User Manual

        .

      • ENVO Display User Manual

        This Display is for the following products: ENVO D50/ST50 ENVO Stax/Stax Pro ENVO Flex

      • ENVO D35 / ST Display Fogging

        We are surrounded by water vapors present in the atmosphere and we quantify this as "humidity". Some areas are humid (such as shoreline) while others may be dry (such as deserts). When the electronic display is produced some of the air is captured ...

      • Unit throws error after startup

        Crosscheck error in KB, execute fix. If unclear/escalate with screenshots to support.

      • 0x30 Communication Error

        -Communication main cable disconnection issue. The pin of the cable might be twisted or damaged. Please open the connection and check the pins of the cable. There are other sensor issues like speed, but we only see 30H error on the display. We never ...