Derailleur out of adjustment due to limit screws or cable tension

Derailleur out of adjustment due to limit screws or cable tension

Fine-tune derailleur limits; inspect for bent hanger, re-tension cable, lubricate as needed.

    Submit a Ticket Here.


    We're happy to help:

    Still can't find the solution?

    Please fill up the support form at the link below:


                      
           
                   Or
                                Connect with our agents through live chats  


      • Related Articles

      • D35/ST - Rear Derailleur Adjustment

        The guide pulley and the biggest cog on the cassette will not be aligned if the gear is skipping.     Turn the cable adjustment barrel counter clockwise when looking from back.   Turning it until the guide pulley aligns with the biggest cog. This ...

      • Lynx 20 - Rear Derailleur Adjustment

      • ENVO D35 Manual

        ENVO D35 is the second generation of ENVO e-bikes engineered by ENVO Drive Systems in Canada for British Columbia’s steep hills, Alberta’s freezing temperatures, the Maritimes’ chilly wind, Ontario’s long commutes and Quebec with all the above ...

      • Spoke Tension for D50/ST50 tires

        We recommend 100 kgf tension for the spokes on both tyres of the D50 and ST50.

      • Frequent chain drop or skips, especially when hitting bumps

        Check derailleur alignment, chain tension. Limit screw adjustment per manual. Consider chain tensioner for severe rough use.