Connections loosen due to vibration/assembly, causing power or control cutout
Unplug and firmly reseat all power, battery, controller, and sensor wires. Use dielectric grease if exposed contacts.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Controller doesn't communicate with battery/motor, causing total power loss
Reconnect power and motor leads. Test with known working controller. Escalate with ENVO for controller replacement.Rack bolts loosen, causing rattle or misalignment
Retighten or replace bolts as per support illustrations; check rack mounting points for strip or damage.Bike turns power on/off randomly; may be harness/switch/controller problem
Inspect for wire pinches, loose connections. Reset system and confirm all power leads. Escalate if unresolved.System is on but motor has no power
Loose connections Check connections and reconnect, make sure to align arrows Brake cut off sensor is malfunctioning Disconnected the brake cut off sensor, check if motor is powering Battery not sufficiently charged Check battery voltage. If the ...Riders want professional assembly option
Request dealer/shop referral from ENVO; if none local, inquire about certified mobile bike assembly service partnerships.