Connecting rod fails, trike loses rear stability or motion
Inspect visually for cracks/breaks. Report with photos and bike details. Request warranty replacement rod and follow support for installation guidance.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
ENVO Flex Trike User Manual
.ENVO Flex Trike Rear Axle Bearing Removal
If you notice a knocking sound coming from the rear axle of ENVO Flex Trike and have been advised by ENVO Tech team please follow the following procedure. Step 1: Remove the Brake calipers. Step 2: Remove the Wheel Nut. Step 3: Loosen the bearing ...ENVO Flex Trike Frame Alignment Tutorial
Here is a tutorial on how to fix the tilt angle displacement on the ENVO Flex Trike Tools Required: Bubble leveler Number 6 Allen key Number 15 wrench Number 19 wrench Steps: Place the bubble leveler on the rear part of the tricycle. You will see ...Both pedal and motor functions are lost (trike cannot move by any method)
Check everything from battery/chain to rod and axle. If both fail, trike must be towed or lifted to local dealer for in-person comprehensive assessment. Document for warranty.Throttle loses response, or trike speed surges/drops unexpectedly
Check throttle wiring at handlebar and controller for firm connection. Inspect for cut/kinked wire at folding points. If physical harness OK, try controller reset. Test on PAS mode—if both affected, escalate for controller assessment.