Charger or controller has continual noise when plugged in

Charger or controller has continual noise when plugged in

Unplug immediately. Try alternate outlet. If noise continues, request charger evaluation/replacement from ENVO.

    Submit a Ticket Here.


    We're happy to help:

    Still can't find the solution?

    Please fill up the support form at the link below:


                      
           
                   Or
                                Connect with our agents through live chats  


      • Related Articles

      • Charger makes noise, doesn’t fully charge battery

        Try alternate wall outlet. If noise continues and battery doesn’t charge, request charger replacement. Stop using faulty charger for safety.

      • ENVO EBike Controller Reprogramming Instructions

        The controller reprogramming device is a small device used to update program in ENVO Ebikes. Step 1: The device required DC power to operate, you can use a powerbank/laptop output to power the device. Step 2: Unplug the display cable and attach the ...

      • Battery does not charge up with standard charger?

        Battery is already fully charged Check battery voltage anything above 41V for 36V battery and anything above 53V for 48V battery is considered fully charged. Please refer to product manual for instructions on accessing voltage values.  Charger does ...

      • Charger does not illuminate or charge battery

        Test with known-working charger. If charger is fault, order replacement. Confirm compatibility.

      • Motor making a grinding noise

        Motor gears may be damaged, the belt may be under stress, or the frame bearings are damaged  Lift the kart, both the tracks should not touch the ground. Slowly activate the throttle and check for the noise. Compare both the tracks Locate the noise by ...