Can you tell me how I know the second battery is connected properly?
To check if your second battery is connected properly:
- Turn off your Flex Overland/Trike/D50.
- Remove the primary battery.
- Turn on the bike. If it runs on the second battery, you know it's connected correctly.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Battery does not lock properly
Incomplete installation of the battery, damage from forcing the battery to lock, battery bracket is misaligned Insert the battery completely and then apply lock. Do not apply force on the key, doing so may cause damage Check the bracket for dirt and ...Is there an indicator that shows me how much battery is left on the second battery? How do I know how much collective battery juice is left on the bike?
Battery Indicator: There are green light indicators on the battery near the power button that show the remaining battery level. Display: The display on your Flex Overland should provide an indication of the average remaining capacity for both ...ENVO Flex (2024) Dual Battery Setup
Install the bracket: Remove the rubber caps from the holes on the rear side of the bike. Attach the bracket to the holes. Open the bike: Open the folding hinge and then the frame of the bike. Remove the controller plate: Remove the two Phillips ...Battery does not charge up with standard charger?
Battery is already fully charged Check battery voltage anything above 41V for 36V battery and anything above 53V for 48V battery is considered fully charged. Please refer to product manual for instructions on accessing voltage values. Charger does ...ENVO D50/ST50 Gear not shifting properly.
If you notice the gear are not shifting properly between 1-9 or 9-1. Follow the following procedure: