Brakes, gears, or other systems not fully tuned upon delivery
Expect minor tuning; follow ENVO setup guide; consider professional tune-up for best performance after assembly.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
The brakes are making noise
Brake pads are rubbing on the rotor Pads need to be adjusted. Adjust the cable tension to shift the left pad, use an Allen key to adjust the right pad. The pads should be adjusted so the rotor spins freely in the middle of the two pads Brakes not ...ENVO Lynx display shows 3 charging bars even after fully charging the eBike
The most accurate way to read battery charge level is to check the voltage on the display. You can short press the power button to cycle through different data. Fully charged battery would show voltage close to 42V (it goes down for older batteries). ...The ebike is skipping gears
Derailleur not in optimal position for gear Adjust derailleur position with barrel adjuster located on the shifterUnable to fully tighten, causing alignment issues
Check bracket fit/alignment, remove debris, tighten bolts gradually, replace if needed.Difficult to change gears; noisy or skips
Adjust derailleur as per manual. Lubricate cables/chain; ensure hanger is straight.