Brakes drag even after lever release; causes slow rolling and noise
Reset caliper alignment, true rotor. Replace pads if uneven or worn past spec. Test freewheel spin before ride.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
The brakes are making noise
Brake pads are rubbing on the rotor Pads need to be adjusted. Adjust the cable tension to shift the left pad, use an Allen key to adjust the right pad. The pads should be adjusted so the rotor spins freely in the middle of the two pads Brakes not ...Rotor not centered (often after shipping or install), causes noise or drag
Check wheel seated correctly. Loosen brake caliper, recenter over rotor, tighten bolts. True rotor by bending gently if needed.Fender rubs on tire, leading to noise/drag
Realign fender, adjust stays/mounts for even clearance, and secure bolts.Brakes squeak, even after break-in
Clean discs and pads (isopropyl), bed new pads, check pad-to-disc alignment as per ENVO resource.Wheel quick release won’t lock tight
Align, check for bent lever/pins, replace if necessary.