Bottom Bracket Torque Sensor installation on NON-CAN bikes
Install the Bottom Bracket Torque Sensor and also Replace the Crank Wheel with a CAN bike Crank Wheel.
Otherwise the Torque Sensor will not work.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Torque Sensor Bottom Bracket Assembly and Disassembly
<br> Installation Process Preparation: Create an 11mm diameter hole under the bottom bracket to route the cable [00:15]. Left Tooth Bowl: Install the left tooth bowl clockwise and tighten it to a torque of 35-40 Newton-meters [00:24]. Cable & ...D50/ST50 BB Torque Sensor Specification Sheet
.Bottom bracket (Error 25), PAS, or cadence sensor errors
Follow ENVO bottom bracket/PAS troubleshooting flow. Clean or replace sensor. If still faulty, escalate for new batch part.Error 25 and pedal sensor/bottom bracket failures repeatedly occur
Reference ENVO’s technical database. Replace bottom bracket with upgraded ENVO part. If unresolved, escalate warranty claim.Motor does not engage when pedaling due to PAS/bottom bracket sensor failure
Check Error 25, test connections at crank/bottom bracket. Review ENVO troubleshooting resources, escalate for part replacement if persistent.