Bottom bracket (Error 25), PAS, or cadence sensor errors
Follow ENVO bottom bracket/PAS troubleshooting flow. Clean or replace sensor. If still faulty, escalate for new batch part.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
Motor does not engage when pedaling due to PAS/bottom bracket sensor failure
Check Error 25, test connections at crank/bottom bracket. Review ENVO troubleshooting resources, escalate for part replacement if persistent.Error 25 and pedal sensor/bottom bracket failures repeatedly occur
Reference ENVO’s technical database. Replace bottom bracket with upgraded ENVO part. If unresolved, escalate warranty claim.Torque Sensor Bottom Bracket Assembly and Disassembly
<br> Installation Process Preparation: Create an 11mm diameter hole under the bottom bracket to route the cable [00:15]. Left Tooth Bowl: Install the left tooth bowl clockwise and tighten it to a torque of 35-40 Newton-meters [00:24]. Cable & ...Other sensor errors (PAS, speed, brake cut-off)
Isolate by checking display error. Follow corresponding troubleshooting in support database.Is torque sensor pedal assist system (PAS) better than motion sensor?
Generally speaking torque sensor is a more sophisticated technology which is getting a good performance and feedback on electric bikes such as those integrated with Bosch, Shimano or Yamaha ebike motor systems. Torque sensor should have an integrated ...