Bike not attaining expected e-assist speed
Ensure battery fully charged. Check for tire drag (fender/rubbing). Review all PAS/throttle display settings. If still slow, test motor performance (may need service).
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
ENVO Flex: Changing Max Speed Settings
Press MODE button for 2 seconds, it will get you into setting menus. You can press UP/DOWN button to change the parameter setting and pressing MODE button will switch the screen to the next parameter. Enter the password "1919" when you get to the Pd ...How to install a pannier on E-Bike
<br><text></text> Here is the step-by-step checklist for installing the pannier bag on your ebike: Prepare the Bag: Disconnect the backpack straps at the bottom and hide them inside the back pocket. Secure the Straps: Once the ...ENVO Lynx 20 Adjust Max Speed and Display Parameter Setting
Sudden loss of assist, especially at low speed
Check throttle and PAS connections; monitor for safety sensor faults; escalate persistent cutoffs.My Bike is showing incorrect speed and distance travelled?
If your wheel size is not set correctly, follow these steps to adjust it: Enter Settings Mode With the vehicle turned on and stationary, press and hold the “i” button for more than 2 seconds. The display will enter the Setting state. Go to Advanced ...