Battery sparks when charger is inserted

Battery sparks when charger is inserted

This is normal when the battery is fully drained and you connect the charger, a small spark is normal, turn off the battery and then insert the charger to the wall plug

    Submit a Ticket Here.


    We're happy to help:

    Still can't find the solution?

    Please fill up the support form at the link below:
    ​
                      
           
                                      Or
    Connect with our agents through live chats  


      • Related Articles

      • Battery sparks when attached to the bracket

        This is normal first turn off the switch and then insert the battery to the bracket. Doing so will prevent sparks

      • Battery does not charge up with standard charger?

        Battery is already fully charged Check battery voltage anything above 41V for 36V battery and anything above 53V for 48V battery is considered fully charged. Please refer to product manual for instructions on accessing voltage values.  Charger does ...

      • The battery is not charging

        Damaged charger / pins, battery cells imbalanced Check the battery voltage with a multimeter or on the display. Fully charged battery voltage should be around 54V

      • ENVO Battery Safety Guidelines

        How to Safely Charge Ebike Battery Most reported battery fires are caused during the charging of the batteries. Hence, customers must be extra cautious when charging the batteries. Following, you can find some tips on the proper charging process: ...

      • After 5 hours charge, the LCD display is still showing half battery. Is something wrong with battery or charger?

        The display charge indicator has a lagging system so that it’ll stabilize in cases of voltage fluctuations.  Switch the bike ON Ride for 10-15 sec, and the bars will show full.  At no load condition ~42V is fully charged ~32V is fully discharged for ...