Battery inserted but display shows no/low charge or no battery
Remove and re-insert battery; check contacts for dirt/debris. Test second battery if possible. Escalate if still not recognized.
Submit a Ticket Here.
We're happy to help:
Still can't find the solution?
Or
Connect with our agents through live chats 
Related Articles
After 5 hours charge, the LCD display is still showing half battery. Is something wrong with battery or charger?
The display charge indicator has a lagging system so that it’ll stabilize in cases of voltage fluctuations. Switch the bike ON Ride for 10-15 sec, and the bars will show full. At no load condition ~42V is fully charged ~32V is fully discharged for ...ENVO Flex Display User Manual
.ENVO Display User Manual
This Display is for the following products: ENVO D50/ST50 ENVO Stax/Stax Pro ENVO FlexENVO Lynx display shows 3 charging bars even after fully charging the eBike
The most accurate way to read battery charge level is to check the voltage on the display. You can short press the power button to cycle through different data. Fully charged battery would show voltage close to 42V (it goes down for older batteries). ...Display doesn’t show battery level or is inaccurate
Check all connections/battery health, reference troubleshooting database, escalate if persistent. Possible controller/display issue.