Error 25 and pedal sensor/bottom bracket failures repeatedly occur

Error 25 and pedal sensor/bottom bracket failures repeatedly occur

Reference ENVO’s technical database. Replace bottom bracket with upgraded ENVO part. If unresolved, escalate warranty claim.

Submit a Ticket Here.

---

We're happy to help:

Still can't find the solution?

Please fill up the support form at the link below:

​

                  

       

                                  Or

Connect with our agents through live chats  

• Related Articles

• Torque Sensor Bottom Bracket Assembly and Disassembly

  <br> Installation Process Preparation: Create an 11mm diameter hole under the bottom bracket to route the cable [00:15]. Left Tooth Bowl: Install the left tooth bowl clockwise and tighten it to a torque of 35-40 Newton-meters [00:24]. Cable & ...

• Motor does not engage when pedaling due to PAS/bottom bracket sensor failure

  Check Error 25, test connections at crank/bottom bracket. Review ENVO troubleshooting resources, escalate for part replacement if persistent.

• Is torque sensor pedal assist system (PAS) better than motion sensor?

  Generally speaking torque sensor is a more sophisticated technology which is getting a good performance and feedback on electric bikes such as those integrated with Bosch, Shimano or Yamaha ebike motor systems. Torque sensor should have an integrated ...

• D50/ST50 BB Torque Sensor Specification Sheet

  .

• Error persists, no fix with standard reset

  Check error code meaning in ENVO KB. Address (e.g., for Error 25, replace bottom bracket). Escalate with evidence if issue persists.