Are the hub motor kits compatible with disc brakes?

Are the hub motor kits compatible with disc brakes?

Yes. All hub motor kits have disk brake standard 6 bolt pattern mounting flange.


    Submit a Ticket Here.



    We're happy to help:

    Still can't find the solution?

    Please fill up the support form at the link below:
    ‚Äč
                      
           
                                      Or
    Connect with our agents through live chats  


      • Related Articles

      • ENVO Conversion Kits Manual

        Conversion Kit Installation Step-By-Step guide: You can download the conversion kit manual using the link below.
      • Can I convert my front brakes to disc, mechanical or hydraulic?

        Typically, yes. The hub should be Disk compatible but you will need to check to see if the front fork can support the disk brake calipers.
      • Does your hub motor fit thru-axle forks?

        The hub motors only work with drop out frame but for thru-axle configuration you can go with a mid drive motor. 
      • Why should you go for a front hub motor?

        95% of our customers choose front hub motor because it’s easy to install and maintain. Front hub motors perform better on slippery roads and even on snow.  Compared to a rear hub motor, you’ll save the headache of visiting a bike mechanic to place in ...
      • ENVO Rear Hub Motor Plate Replacement

        Step 1: Remove the Rear wheel from the frame Step 2: Remove the Cassette from the motor Step 3: Remove Jam Nut from the axle Step 4: Remove bearing retail ring and push out the plate as shown below